DIFFERENT TYPES OF GUTTER BRACKET AND HANGERS

Attaching gutters to your home can help you prevent costly water damage to your siding and foundation by directing rainfall away from your home’s exterior.

There are many different types of gutter brackets and hangers, each with its own benefits and disadvantages. Understanding the different types of brackets available allows you to choose the option that’s best suited to your needs.

Here’s an overview of the options available so you can find the best gutter brackets for your needs.

Water hammer arrestors

These devices are designed to protect your home from the harmful effects of water hammer. Water hammer arrestors are available in a variety of sizes and styles to fit your specific needs.

There are two main types of water hammer arrestors:

•  inline and

• whole-house.

 Inline water hammer arrestors are installed on the incoming water line, while whole-house arrestors are installed on the main water line leading into your home. The type you choose will depend on where you want to install it.

When installing an inline water hammer arrestor, it’s important that the connection is fastened tightly so that no leaks occur. If there is any leakage at all around the connection point, it can cause damage to other parts of your plumbing system.

With whole-house arrests, it’s important not to use plastic or galvanised metal washers when tightening them down with screws or bolts because they can crack and break off during installation. Stainless steel washers should be used instead for longevity and safety reasons.

Leaf guards

Different types of gutter brackets and hangers offer different levels of protection for your gutters. Some, like leaf guards, fit over the top of your gutters to keep leaves and other debris from clogging them.

Others, like gutter hangers, attach to the side of your gutters and help support their weight. Still others, like gutter brackets, are used to hold your gutters in place. No matter which type you choose, make sure it’s the right one for your needs. For example, if you’re using a gutter bracket on a roof with an overhang, a leaf guard may not be enough.

Make sure you know what type of bracket or hanger is appropriate for your situation before making a purchase. Otherwise, you could end up spending more money than necessary on something that won’t work for your specific project.

Pole mounted Gutter

These types of gutters are attached to the side of your house with hangers that affix to the fascia board. Some pole mounted gutters also have a second set of hangers that attach to the soffit.

This provides additional support for the gutter, which is important because these types of gutters tend to be larger and heavier than other types.

One advantage of pole mounted gutters is that they are less likely to sag than other types. This is because the hangers distribute the weight evenly across the length of the gutter. Another advantage of pole mounted gutters is that you can easily access them from ground level when it comes time to clean them out.

A disadvantage is that some people find this type of bracket more expensive, but if you live in an area where snow loads are high or trees hang over your roof, it might be worth it.

Undermount Gutter

These are the most popular type of gutter system, and they offer a clean, streamlined look. The gutters are mounted underneath the shingles on your roof, which means they’re less likely to be damaged in high winds or during a storm and they’re easy to install and maintain.

There are two types of undermount gutters: open and closed.

Open undermount gutters have a lip that extends beyond the edge of the gutter, while closed undermount gutters sit flush with the edge of the gutter.

The benefits of Open undermount gutters are less likely to collect debris, but they can be more difficult to install while Closed undermount gutters don’t tend to collect as much debris, but they may not be as durable as open ones.

Magnetic rain screens

If you live in an area with a lot of trees, you know that your gutters can get clogged with leaves and debris. A rain screen is a great way to keep your gutters clean and prevent them from getting clogged.

There are different types of rain screens, but the most common type is the magnetic rain screen gutter bracket. It consists of a plastic or aluminium mesh covered in magnets. The screen will attach to your gutter so it is up off the ground and out of reach for falling leaves and other items.

The other two common types are non-magnetic and PVC rain screens. Non-magnetic rain screens use stainless steel rods, while PVC uses vinyl coated steel rods to attach it to the gutter’s metal brackets.The Benefits of each rain screens are:

Magnetic screens provide excellent protection against leaf accumulation, which can reduce water flow and lead to mould build-up on your roofing materials.

Non-magnetic screens are not prone to rust, but they do require periodic cleaning as they cannot trap leaves like the magnetic ones can. And PVC rain screens last longer than either of the other two options because they have less contact with outside elements than the others do.

Straight channels (channel gutters)

Channel gutters are the most common type of gutter. They are also called straight or open gutters because they don’t have any seams and are one of the best gutter bracket.

Channel gutters are available in different widths and depths to accommodate different roof sizes. The most common size is five inches wide by four inches deep.

There are two types of hangers that are used with channel gutters:

• Spike and ferrule hangers :

These hangers have a spike that goes through the gutter and into the fascia board.

• Bracket hangers:

These brackets come in different shapes and styles, but typically come in either a J-hook shape or an L-shape . These brackets attach to the house’s fascia board, whereas spike and ferrule hangers attach directly to the gutter.

Conclusion

This is all you need to know about Different types of Gutter brackets and hangers as Some bracket hangers are self-sealing, which means no nails or screws need to be driven into the wood when installing them.